Wolfgang Warmbier ESD Floor Stripper
An ESD floor stripper for the safe and effective removal of existing floor polishes or coatings prior to application of ESD floor finish.
Supplied in 5 litre containers.
Coverage approximately 10 m2 per litre of concentrate.
Not suitable for use on linoleum flooring material.
(Application and product safety data sheet can be found in Product Information below).
Wolfgang Warmbier ESD Floor Stripper (Product code: 14012)
Wolfgang Warmbier ESD floor stripper is formulated for the safe and effective removal of existing floor polishes or coatings prior to application of ESD floor finish. It is not suitable for use on linoleum flooring material.
Applying the stripper:
1. Dilute 1 litre of floor stripper to 4 litres of tap water, apply with a mop to remove existing coating and allow it to react for 5 – 10 minutes.
2. Remove any residue and then rinse the floor with tap water prior to application of ESD floor finish.
3. Repeat the process as necessary for heavily contaminated floors.
Coverage:
Approximately 10 m2 per litre of concentrate.
Storage:
Protect from frost and heat. The stripper can be stored for up to 24 months. After opening, the ESD floor stripper should be used within 12 months.
Quantity:
5 litre container
Browser not supported
We recommend that you use the latest version of Chrome, Edge or Firefox.
£32.00
